On September 23, 2018 at Dells Raceway Park after The Midwest Truck Series 50 Lap Feature, tech officials found an illegal camber snout on the 1st place #4 truck. After several days of deliberation it has been decided that the #4 truck will be penalized by being put into last place for this feature’s points and payout. This was an extremely difficult decision for Midwest Truck Series staff but we felt that this was fairest choice for all teams.
I would like to sincerely thank all parties involved in this difficult decision.
Rule update effective today:
All bolts on stouts must be a zero degree from said manufacturer. A tolerance of no more than plus or minus .5 Degrees to compensate for deflection.